Fencing Panels
We manufacture a good selection of our own fencing panels on site. These are often held in stock in 6’ wide sizes but can also be made up to measure to individual customer specifications. All panels are pressure treated.
Waney Lap
This is perhaps the most popular panel and can be made in any size up to 6’ square. It is made with horizontal boards which are overlapped and held in place with vertical battens. The panels are topped with a bevelled cap. They can also be arched if required, using a laminated batten. We use a thicker board than many other stockists and this fact, together with the fact that the boards are pressure treated, ensures that they are a heavy duty panel.
Feather Edge
This panel is made using rough sawn vertical feather edge boards which are placed onto horizontal backing rails (therefore giving a distinct front and back to the panel). It provides a strong panel which can have the top either arched up or dipped down (the overall height of the arch/dip is usually 6” but can once again be altered to suit your individual requirements). The panel can also be double sided if required to provide a front side finish to both sides of the fence.
Palisade
This panel is made using rough sawn vertical Yorkshire boards (4” wide by 5/8” thick – 100mm x 16mm) which are placed onto horizontal backing rails (therefore giving a distinct front and back to the panel).
It provides a strong panel which can have the top either arched up (see picture, right) or dipped down (the overall height of the arch/dip is usually 6” but can once again be altered to suit your individual requirements).
Another option with this style of panel is to have the individual pales either rounded (see picture, top left) or pointed.
The panel can also be double sided (see picture, right) if required to provide a front side finish to both sides of the fence.
PRICING
Our prices can be found on our panels price list which is available from the office/website (here).
If you require any further information, please ask for details.
Trellis Panels
We manufacture a wide selection of our own trellis fencing panels on site. These are usually made to order to suit individual customer specifications.
Square Standard & Chelsea Trellis
We offer 6 main styles of trellis which 
we make on site. The square trellis is made using rough sawn battens and can be made up to any size. They can also be arched up or dipped down (this is usually a 6” arch over 6’ width).
The 2 main types are the standard trellis (which has an approx. 4” square gap) and the Chelsea trellis (which has an approx. 2” square gap).
Diamond & Chelsea Diamond Trellis
Our diamond trellis is made using the same battens but is also fully framed (see picture, left), meaning that it is not suitable to go on top of a fence panel (as it is approximately 2.5” wide).
It comes in a 4” (diamond) or a 2” gap (Chelsea diamond) option.
Our diamond and square trellis are made using pressure treated battens.
Redwood lattice
We also make a redwood lattice which is made in our joiners shop and consists of planed redwood strips which are framed. This trellis can only be pressure treated if not over 4’ wide.
Once again, it comes in either a large or small gap.
PRICES
Prices for these panels are available from our staff in the office.
GRANGE Trellis Panels
There is also a wide variety of trellis panels in the Grange brochure – available from the office or from our website. These include many different sizes and styles (and price ranges!)
PRICING
all our prices can be found on our panels price list – available from the office or via the website (here).
Contact us for expert advice and information on fencing and fencing panels.
